ISO 12210-1-1998 起重机工作和非工作状态下的锚定装置第1部分:总则
时间:2024-05-16 08:03:39 来源: 标准资料网 作者：标准资料网 阅读：8597
【英文标准名称】:Cranes-Anchoringdevicesforin-serviceandout-of-serviceconditions-Part1:General
【原文标准名称】:起重机工作和非工作状态下的锚定装置第1部分:总则
【标准号】:ISO12210-1-1998
【标准状态】:现行
【国别】:国际
【发布日期】:1998-07
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC96
【标准类型】:()
【标准水平】:()
【中文主题词】:运输方法;提升设备;规范;安全装置;装卸设备;锚具;起重机;总论;信号装置
【英文主题词】:Anchorages;Cranes;Generalsection;Handlingequipment;Liftingequipment;Meansoftransport;Safetydevices;Signaldevices;Specification
【摘要】:ThispartofISO12210establishesthegeneralcriteriafortheprovisionofanchoringdevicesforcranesandcranepartsforin-serviceandout-of-serviceconditions.OtherpartsofISO11210presenttherequirementsforspecificcranetypes.
【中国标准分类号】:J80
【国际标准分类号】:53_020_20
【页数】:1P;A4
【正文语种】:英语
Product Code:SAE AMS7257
Title:Rings, Sealing, Perfluorocarbon (Ffkm) Rubber High Temperature Fluid Resistant 70-80
Issuing Committee:Ams Ce Elastomers Committee
Scope:This specification covers a perfluorocarbon (FFKM) rubber in the form of molded o-rings. These sealing rings have been used typically in applications in contact with air or a variety of fuels, lubricants and hydraulic fluids from -15 to +290 degrees C (+5 to 554 degrees F), but usage is not limited to such applications. Each application, however, has to be considered individually. Instances are known when these rings have been used below -15 degrees C (+5 degrees F) and above 290 degrees C (554 degrees F). The cross section of such rings is usually not over 0.275 inch (6.98 mm) in diameter or thickness.【英文标准名称】:Airconditioners,liquidchillingpackagesandheatpumpswithelectricallydrivencompressorsforspaceheatingandcooling-Part2:Testconditions;GermanversionEN14511-2:2004
【原文标准名称】:空间加热和制冷用带电驱动压缩机的空调、液体冷却包和热泵.第2部分:试验条件
【标准号】:EN14511-2-2004
【标准状态】:现行
【国别】:
【发布日期】:2004-07
【实施或试行日期】:
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:空间加热和制冷用带电驱动压缩机的空调、液体冷却包和热泵.第2部分:试验条件
【中国标准分类号】:J73
【国际标准分类号】:91_140_30
【页数】:19P;A4
【正文语种】:英语